| Gyártó | Startech |
| Típus | PCI-e kártya |
| Csatlakozó felület | PCI Express |
RENDELHETŐ (2-3 munkanap)
23 570 Ft
(18 559 Ft + ÁFA)Expand the storage and improve the performance of your computer, with slots for two M.2 SATA SSDs and one M.2 PCIe SSD
Supports PCI Express 3.0 (x4), ideal for a high-performance M.2 PCIe SSD (NVMe)
SATA slots feature a passthrough design, so your drives can connect to the SATA ports on your host PC
Full bandwidth is available for each M.2 drive simultaneously (up to approximately 40Gbps for M.2 PCIe drives, and up to 6Gbps for M.2 SATA III drives)
Wide installation compatibility, with support for a range of M.2 drives (2280, 2260, 2242, 2230)
Adjustable stand-offs and multiple mounting holes support 80 mm, 60 mm, 42 mm, and 30 mm SSDs
OS independent with no drivers required, for a fast, hassle-free setup
Equipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small form-factor computers
Installs into x4, x8, or x16 PCIe slots
| Hardware | |
| Bus Type | PCI Express |
| Card Type | Standard Profile (LP bracket incl.) |
| Industry Standards | Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps) |
| PCI Express 3.0 | |
| Interface | M.2 SATA (NGFF) |
| SATA | |
| M.2 PCIe (NVMe) | |
| Port Style | Integrated on Card |
| Ports | 3 |
| Performance | |
| ATAPI Support | Yes |
| Bootable | Yes |
| MTBF | 50,000 Hours |
| Port Multiplier | No |
| RAID | No |
| Type and Rate | SATA III (6 Gbps) |
| Connector(s) | |
| Connector Type(s) | 1 - PCI Express x4 Male |
| Internal Ports | 3 - M.2 (NGFF, B-Key) Receptacle |
| 2 - SATA (7 pin; Data) Plug | |
| Software | |
| OS Compatibility | OS Independent; No additional drivers or software required Note: When installed in a compatible operating system, the card is natively supported and doesn’t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express). |
| Special Notes / Requirements | |
| Note | The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane. |
| System and Cable Requirements | A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot |
| One or two SATA host ports on the host computer (for example, the SATA controller card, or the motherboard SATA ports inside of your computer) | |
| An operating system that natively supports PCIe SSDs (NVMe), such as: - Windows® 7 and later - Mac OS 10.10.3 and later | |
| Indicators | |
| LED Indicators | 3 - M.2 drive status/activity |
| 1 - Power | |
| Environmental | |
| Humidity | 20%~80% RH (Non-condensing) |
| Operating Temperature | 5°C to 50°C (41°F to 122°F) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
| Physical Characteristics | |
| Product Height | 120 mm [4.7 in] |
| Product Length | 120 mm [4.7 in] |
| Product Weight | 46 g [1.6 oz] |
| Product Width | 20 mm [0.8 in] |
| Packaging Information | |
| Shipping (Package) Weight | 122 g [4.3 oz] |
| What's in the Box | |
| Included in Package | 1 - 3-port M.2 NGFF SSD adapter card |
| 1 - low-profile bracket | |
| 3 - M.2 mounting screws | |
| 3 - M.2 mounting standoffs | |
| 3 - M.2 mounting nuts | |
| 1 - screwdriver | |
| 1 - quick-start guide | |
| Típus | PCI-e kártya |
| Csatlakozó felület | PCI Express |
| Chipset | N/A |
| Súly | 0.12 kg |
Startech MDP 1.2 TO DP MST HUB 34 400 Ft
Startech 4 port PCI-E serial card 58 000 Ft
Startech PCIE TO PCI/PCIE expansion 227 390 Ft
